nyloflex® ITP 60

nyloflex^® ITP 60 – Performance & Versatility for flexible packaging, labels & board.

BENEFITS

Superior print quality and efficiency.

High durometer flexo plate designed for excellent print quality.
Print the finest stable highlights – down to 0.4% at 60 L/cm*.
Maximum color gamut achievable thanks to fine highlights and high solid ink density.
Highest quality achieved in flexible packaging in combination with screening technologies.
Minimize waste by combining flexible packaging and label jobs on one plate.
Reduce cost, save time – no additional equipment or consumables required, fits in your existing digital plate making workflow.
Solvent & Thermal Plate making compatible.
Less press downtime – no ink fill in thanks to patented Clean Plate technology.
Longer durability thanks to less plate swelling on press.
Up to 20% reduction in ink consumption in combiantion with woodpecker surface screening.

SUITABLE EQUIPMENT

nyloflex® ITP-60 Digital plates may be exposed using any nyloflex® exposure system and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates. nyloflex® ITP-60 Digital plates can be processed in either solvent or LAVA® thermal processing systems.

PRINTING INFS

Suitable for all UV, water based and solvent based printing inks (ethyl acetate content preferably below 15%, ketone content preferably below 5%).

Horizontal Tabs

Technical data

Technical characteristics
	nyloflex^® ITP 60 D
	114	170
Base materia:	Polyester Film
Color of raw plate:	Purple
Total thickness¹:	1,14 mm	1,70 mm
Plate hardness (Shore A):	78	71
Recommended relief depth:	0,5 - 0,7 mm	0,6 - 0,9 mm
Tonal range at screen ruling 80 L/cm:	1% - 99%
Fine line width:	50 µm
Isolated dot diameter:	100 µm
Processing parameters²
Back exposure:	15-30 s	20-70 s
Main exposure:	8 - 10 min
Washout speed:	200 - 250 mm/min	180 - 220 mm/min
Drying time at 60°C:	1,5 2,0 h
Post exposure UV-A:	5 min
Light finishing UV-C³:	1 - 5 min

1. Standard thicknesses currently available – subject to change

2. All processing parameters depend on, among other things, the processing equipment, lamp age and the type of washout solvent. A minimum exposure intensity of ≥ 17 mW/cm2 is recommended. The above mentioned processing times were established under optimum conditions in our technical center. The standard test file with 149lpi was imaged at 4000DPI using a ThermoFlexX imager, 20 mW/cm2 bank exposure, using nylosolv® A / SOLVIT® washout solvent and nyloflex® and ThermoFlexX Catena plate processing equipment. Under other conditions the processing times can differ from these; therefore, the above mentioned values are only to be used as a guide.

3. Depending on longevity of the tubes.

4. Suitability with UV inks is dependant on the ink type and temperature – these factors could affect the performance of the plate and consistency of the print.

nyloflex® ITP 60

Horizontal Tabs

Technical data

SEE ALSO

CONTACT

Search form

nyloflex® ITP 60

Horizontal Tabs

Technical data